New Era Technique Private Limited

Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-component material in pre-weighed quantities ready for on-site mixing and use. The ‘base’ component is white and the ‘hardener’ component is green, providing visual evidence that adequate mixing has been achieved.Uses:For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.Advantages Nitobond EP may also be used as part of a repair system where a substrate/repair barrier is required or where the substrate is likely to remain permanently damp or wet. Can be applied on to dry or damp substrates Exhibits high mechanical strength Positive adhesion - exceeds that of the tensile strength of the host concrete Slow cure allows time to erect steel reinforcement and formwork Solvent-free - can be used in enclosed locations

Conplast WL Xtra is Integral waterproofing liquid admixture for concrete, plaster and mortars. It is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofing compounds as its use results in two fold improvement of concrete or mortar.
Feature and Benefits:

• Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
• Corrosion resistant: Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
• High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
• Cohesive Mix : Improves workablity and cohesiveness of the concrete.
• Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Brushbond TGP* crystalline capillary waterproofi ng system contains proprietary blend of portland cement, quartz aggregate and special chemicals. Brushbond TGP* crystalline waterproofi ng system is used for waterproofi ng against the positive or negative sides of hydrostatic heads of water, for dampproofi ng, repairing cracks, plugging holes, sealing wall - floor joints and stopping active leaks in a wide variety of condtions including :

• Sewage treatment and water treatment plants, tanks, foundations, tunnels and manholes.  Terrace garden, balconies, sunshades etc.
• Roof and Sunken slabs
• Industrial and office buildings
• Reservoirs, water holding structures etc.

Advantages

• Meets the requirements as per ANSI/NSF Std 61 for suitability to potable water
• Penetrates concrete, seals capillary tracts
• Contains no chloride
• Easy to apply
• Resists chemical attack of sewage and industrial wastes
• Suitable for external and internal applications.

New Era Technique Private Limited is engaged in wholesale trading of Waterproofing Chemical, Epoxy Flooring Chemical, etc. We also provide Anti Corrosion Coating Service, etc. to our clients. Under the able guidance of our mentor, Mr. Rajesh Gupta(Director) we have created a special position of pride in the industry.