New Era Technique Private Limited

Minimum order quantity: 50 Bag

Cebex 100 is an admixture for cementitious grouts and concrete where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. Cebex 100 is supplied as a powder admixture. The material is a combination of a plasticising agent and a gas-producing expansion medium. The plasticising agent allows the use of a reduced water/cement ratio with consequent increased strength and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
Advantages

1. Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
2. Reduced water/cement ratio in the grout mix ensures low permeability and long-term durability in service.
3. Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
4. No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
5. Composition allows high early strength development in grouts, without the use of chlorides.

Minimum order quantity: 20 Litre

Nitobond SBR(Latex) is modified styrene butadiene emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Uses
For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonary and slurries.

Advantages 

• Simple to use - Single component, gauged as required.
• High - Provides excellent bond to concrete, adhesion plaster, masonry, stone work, etc.
• Improves -Gives weather resistant mortar with improved durability impermeability to chlorides and other harmful agents.
• Reduces - Provides waterproof screeds, plasters and Permeability slurries.
• Increases - Improved tensile and flexural properties strength allow thin applications.
• Versatile - Compatible with all common hydraulic cements.
• Cost effective - Nitobond SBR (Latex) is economical to use

New Era Technique Private Limited is engaged in wholesale trading of Waterproofing Chemical, Epoxy Flooring Chemical, etc. We also provide Anti Corrosion Coating Service, etc. to our clients. Under the able guidance of our mentor, Mr. Rajesh Gupta(Director) we have created a special position of pride in the industry.

Nitobond EP Std is a two component epoxy bonding agent supplied in pre-weighed quantities for ready on-site mixing and use.
Uses
Bonding old and new cementitious substrates.
Advantages

• It can be applied on concrete & mortar substrate
• Facilitates improvement in mechanical strength
• Good positive adhesion

New Era Technique Private Limited is engaged in wholesale trading of Waterproofing Chemical, Epoxy Flooring Chemical, etc. We also provide Anti Corrosion Coating Service, etc. to our clients. Under the able guidance of our mentor, Mr. Rajesh Gupta(Director) we have created a special position of pride in the industry.

Nitobond AR Std. is a single component latex acyrlic polymeremulsion used as bonding aid cum cement modifier withwaterproofing property. Nitobond AR Std. is a single component latex acyrlic polymer emulsion used as bonding aid cum cement modifier with waterproofing property.

Uses

1. For improving and bonding floor toppings, mortars and renders
2. As a bonding agent for Renderoc and other cementitious mortars
3. Polymer modified mortars and screeds for reinstatement of worn out/damaged concrete 
4. Polymer modified concrete for improving the impermeability and there by enhancing the waterproofing property

• Good adhesion - Provides good bond to concrete, masonry, stone work, plaster and block work. Increased strength - Improves tensile and flexural properties of mortar.
• Versatile - Compatible with all common hydraulic cements
• User friendly - application by brush/spray
• Improves cohesion - No bleeding and segregation