New Era Technique Private Limited

Renderoc HS Xtra is a Dual Shrinkage expansion, fi bre reinforced, single component, polymer modifi ed, cementitious, repair mortar system supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent, repair mortar suitable for structural concrete and masonry repairs.
Application.

• Vertical and overhead repairs to restore ‘covercrete’
• General concrete and masonry repairs
• Voids greater than 10 mm deep
• Repairs to honeycombing
• Larger scale repairs where formwork cannot be erected

Advantages
Renderoc HSXtra features Dimensional Stability Technology - a new materials technology which controls the rate of drying shrinkage such that, when used correctly :

• the dimensions of the repair remain stable; and thus
• eliminating failure, due to shrinkage cracking.

This in turn leads to a series of associated benefits :

• Cost effective - shrinkage control enables repairs to be completed ‘right first time’
• Enhanced durability - works in tandem with extremely low permeability to prolong eff ective working life
• Compatibility - aligns performance closer than ever before, to that of host concrete
• User friendly - specifi cally developed to provide an easyto- apply product, suitable for local conditions
• Definable performance - positive benefi ts are easily demonstrated via a single, simple measurement

Brushbond Roofguard is a single component acrylic polymer modifi ed, elastomeric fi bre reinforced high build & easy roller applied / brushable coating available in diff erent colours for application in multiple layers, minimum 3 layer application is recommended for best performance.

Uses:
Brushbond Roofguard is high build fi bre reinforced seamless waterproofi ng render suitable for waterproofi ng of old & new roofs, it is a polymer base product applied in three OR more coats & each coat with diff erent colours for monitoring correct thickness. The product can be applied directly on existing concrete, brickbat coba, and screed concrete even without removal provided the substrates are sound enough for application of the coating avoiding the risk of damage to the old roof associated while removing of the existing overlays. The product provides a seamless, tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications.

Advantages:

• High Build system provides higher dry fi lm thickness of more than 1mm in three coats.
• The product can applied directly on existing sound concrete, brickbat coba, screed concrete even without removal
• No protection screed required eliminating the additional weight due to protection layer
• Excellent barrier to carbon dioxide, chloride and sulphate ions.
• Allows water vapour to escape from the structure.
• High resistance to the eff ect of long-term weathering,
• Durable in all climate conditions including UV attack.
• Excellent bond to concrete and masonry.
• Good crack accommodation capacity.
• Minimum surface preparation needed and low labour.

Conplast WL Xtra is Integral waterproofing liquid admixture for concrete, plaster and mortars. It is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofing compounds as its use results in two fold improvement of concrete or mortar.
Feature and Benefits:

• Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
• Corrosion resistant: Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
• High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
• Cohesive Mix : Improves workablity and cohesiveness of the concrete.
• Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Conplast WL Xtra is Integral waterproofing liquid admixture for concrete, plaster and mortars. It is a dark brown liquid based on cement dispersion polymers which mixes readily with water and therefore disperses evenly. Conplast WL Xtra waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder and conventional integral waterproofing compounds as its use results in two fold improvement of concrete or mortar.
Feature and Benefits:

• Advanced Technology : New generation molecule yields high performance concrete. Suitable for any grade of concrete including higher grades.
• Corrosion resistant: Meets the requirements of Japanese code JIS Z1535 (modifi ed) fi rst of kinds in the integral water proofi ng range.
• High Strength : Due to better dispersion of cement particles and helps in the better degree of hydration yielding high strength compared to control.
• Cohesive Mix : Improves workablity and cohesiveness of the concrete.
• Durability : Improves durability due to reduction in permeability of concrete and corrosion resistance of steel.

Renderoc SP 40 is a Shrinkage controlled, polymer modifi ed, fi bre reinforced cementitious repair mortar, specifi cally designed for spraying. It is supplied as a single component, ready to use blend of dry powders and fi bres which requires only the addition of clean water to produce a highly consistent, hand and spray grade, repair mortar suitable for most structural and load bearing repairs.

UsesRenderoc SP40 is suitable for wet spraying and hand application in a wide variety of repair applications, and is particularly well suited to vertical and overhead repairs. Typical applicationswould include, but not be limited to, the following:Mass infi ll to large areasRepairs to irregular profi lesExcellent for repairs to fi re-damaged concreteFast track repair programmes, where rapid application at high volume is requiredSingle layer, high build applications

AdvantagesCost eff ective - shrinkage control enables repairs to be completed, right first time‟. Very low rebound is an additional cost benefitEnhanced durability - works in tandem with extremely low permeability to prolong effective working lifeCompatibility - aligns performance closer than ever before, to that of host concreteUser friendly - specifi cally developed to provide an easy to- apply product, suitable for local conditionsDefinable performance - positive benefi ts are easily demonstrated via a single, simple measurement