New Era Technique Private Limited

General purpose, non-shrink, cementitious micro-concrete.Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete.

Conplast SP430 G8 DIS is based on Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water. Conplast SP430 G8 DIS has been specially formulated to give high water reductions upto 20% without loss of workability or to produce high quality concrete of reduced permeability.
Uses

• To produce pumpable concrete
• To produce high performance concrete by reducing water resulting low permeability and high strength.
• To produce high performance concrete requiring little vibration during placing.

Advantages

• Improved workability - Easier, quicker placing and compaction.
• Increased strength - Provides high early strength for precast concrete with the advantage of higher water reduction ability.
• Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.
• Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.

Auramix 400 is a Advanced Low Viscosity High Performance Superplasticiser, based on Polycarboxylic technology. It is a unique combination of the latest generation superplasticisers, based on a polycarboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs but the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in fl owable concrete. Auramix 400 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability.

Uses
Auramix 400 is a high performance superplasticiser intended for applications where high water reduction and long workability retention are required, and it has been developed for use in:
 Self-compacting concrete,
 Pumped concrete,
 Concrete requiring long workability retention,
High performance concrete.

Advantages
 Low viscosity suitable for pumping of different grades of concrete to higher floors
 Higher E modulus
 Improved adhesion to reinforcing and prestressing steel
 Better resistance to carbonation
 Lower permeability
 Better resistance to aggressive atmospheric conditions
 Reduced shrinkage and creep
 Increased durability

Conplast SP430 G8  QCDA 820 is a Superplasticizer Admixture, based on Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water. Conplast SP430 G8 DIS has been specially formulated to give high water reductions upto 20% without loss of workability or to produce high quality concrete of reduced permeability.
Uses

• To produce pumpable concrete
• To produce high performance concrete by reducing water resulting low permeability and high strength.
• To produce high performance concrete requiring little vibration during placing.

Advantages

• Improved workability - Easier, quicker placing and compaction.
• Increased strength - Provides high early strength for precast concrete with the advantage of higher water reduction ability.
• Improved quality - Denser, close textured concrete with reduced porosity and hence more durable.
• Higher cohesion - Risk of segregation and bleeding minimised; thus aids pumping of concrete Chloride free - Safe in prestressed concrete and with sulphate resisting cements and marine aggregates.