New Era Technique Private Limited

Lokfix E45T Styrene free vinyl-ester resin based car-tridge system, for anchoring reinforcement and fixings into a variety of substrates. Ex-tended setting for hot climates.It  is a two component vinyl-ester anchoring ma-terial, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.


Uses:
For concrete (solid, porous and light), masonry and hollow bricks.
■ Accredited* for use in dry, wet and flooded concrete sub-strates, internal and external exposure.
■ Can be used with cracked concrete
■ Fixing of post installed reinforcement and tension anchors
■ Anchoring of threaded rod fixings
■ Can be applied to a wide variety of fixing and rebar sizes
■ For horizontal, vertical and overhead application
■ Bonding and surface crack sealing applications prior to Nitofill injection.
■ C1 and C2 seismic resistance*

Advantages:

■ High bond strength
■ Extended open time for working in high temperatures or on complex setting configurations.
■ Rapid return to service
■ Can use with a good quality skeleton gun (300ml size), No additional mixing equipment required
■ Does not apply expansive force to the substrate
■ Enables fixings closer to edges than mechanical anchors
■ Low VOC
■ Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
■ Waterproof, protecting the embedded fixing from corro-sion and water penetration into the substrate.

Lokfix E55 is a Styrene free vinyl-ester resin based cartridge system, for anchoring reinforcement, fixings into a variety of substrates. It is two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.

Uses
For concrete (solid, porous and light), masonry and hollow bricks.
■ Accredited for use in dry, damp and flooded concrete substrates
■ Can be used with cracked concrete
■ Fixing of post installed reinforcement*
■ Anchoring of threaded rod fixings
■ Anchoring of internal threaded rod sleeves
■ Internal, external and submerged conditions
■ Can be applied to almost any size of fixing
■ For horizontal, vertical and overhead application
■ Bonding and surface crack sealing applications

Advantages
■ High bond strength
■ Rapid return to service
■ Can use with a good quality skeleton gun (300ml size)
■ No additional mixing equipment required
■ Does not apply expansive force to the substrate
■ Enables fixings closer to edges than mechanical anchors
■ Resistant to a variety of chemicals
■ Re-usable by replacing the static mixer
■ Low VOC
■ Waterproof, protecting the fixing from corrosion
■ Performs over a wide variety of temperatures 
■ C1 seismic resistance, Lokfix E55S only
■ Fire rated up to 2 hours, Lokfix E55S only